Battered Bagnal

I've not hung around getting Kidbrooke ready to be permanently abandoned on a length of track in Minffordd Yard.

I don't have enough tiny alphabet transfers in stock to attempt to replicate all the graffiti which was painted onto the hulk of the loco during its time in the yard, but I've had a go at representing some of the other whitewash embelishments.

The 3d print was given a spray with red oxide primer before applying a succession of diluted acrylic washes of various shades of brown and then dry brushing with some orange hues and darker colours to get what I hope looks like a suitably rusty effect.

Being a print it is absolutely featherweight so we'll have no problem permanently gluing it onto the length of track in front of the slate sheds.

It should make an interesting conversation piece in Porthmadog in a two week's time.

I wonder what the ratio will be between those who give a knowing smile and those who point and say 'What's that doing there?'

Surgical Violence

There's nothing so strange as receiving a new model in the post and then immediately starting to hack it to bits, but that was how I spend one afternoon this week.

The model in question is a Fourdees 3D print of a Bagnall 0-4-0 which is being heavily distressed to be version of Kidbrooke, a small tank which spent most of the 1960s looking very sorry for itself in Minffordd Yard.

The kit is very cleverly designed so you can sit the body on a static chassis with very nicely represented valve gear, or install a Bachmann Percy chassis.

No other adaptation is required, it is simple swap.  Nicely done Fourdees!

The fidelity of these prints is most impressive these days, although it's fortunate that I needed to chop a lot of bits off because in my experience it is incredibly easy to break off the small details on models such as this.

Whilst I admire that it is possible to render such fine items such as handrails, regulators and really small pipework I do wonder whether it wouldn't be better to leave it for modellers who desire this kind of detail to add it themselves in a more robust material?

The other aspect which always makes check and check again with prints like this differentiating what is a production support sprue which needs to be removed, and what is the part of the model which must remain?  

The spider's web of supports in the cab opening on this print are a case in point.

As you can see by comparing the photos I've posted there was a lot which needed to be chopped off and filed away, such as the cab back sheet, the chimney, smokebox door and the dumb buffers.

The most intricate job was to remove the cab support frame so the cab roof can be resting partly on top of the saddle tank, which is how the loco looked when it was at Minffordd.

With the destruction done the next task is to paint and weather it to look supremely rusted and neglected....

Space Saver

There's one finishing touch to be added before we pack up Minffordd to take it it Porthamdog next month.

Having recently become aware that during the 1960s the hulk of the Bagnall 0-4-0 Kidbrooke was hanging around the yard we had to do something to represent that.

You can read more about it here.

A 3D print of a very similar Bagnall tank should be arriving any time soon, and shall set to work distressing it appropriately.

In the meantime, Himself has prepared a isolated length of weed-strewn track for it to rest on.

This is not strictly prototypical because in reality Kidbrooke was placed on the long siding which runs in front of the Maenofferen sheds, but that's a useful bit of yard for shunting wagons around so we're going to reposition it slightly.

The model in the picture is an old white metal body we somehow acquired - or were gifted - long ago and is sitting there to give an impression of how it's going to appear.

Missing Pieces

Having exhibited layouts of real locations for the last 30 years and more we've got used to people pointing out the bits we've missed - in fact we've come to welcome it.

I mean, why wouldn't you, if you're trying to faithfully recreate somewhere in miniature you want to do the best you can to make it as accurate as possible, don't you?

On Dduallt, for example, we had a couple of occasions where former 'Deviationists' brought some oversights to our attention, such as the 'sheep creep' which was missing in the area just beyond Barn Cutting at the back of the layout.

And then there was the former volunteer who told us the story about how on one occasion he was drilling into a rock and the drill bit broke and could not be removed.

So we asked him to point to the spot and at the next opportunity inserted a small bit of wire at the appropriate place.

With the development of the Minffordd project being shared so widely on social media I've been surprised we haven't received more "you've missed that" messages.

Something which was mentioned the other day, and which I never came across in our research, was the presence of the rusting hulk of Bagnall 0-4-0 tank Kidbrooke in Minffordd Yard in the 1960s.

Image taken from Festipedia

This loco, dating from 1917, was bought from the Oakeley Slate Quarry in Blaenau Ffestiniog by Richard Hilton and was stored in the yard until 1970, when it was moved to his home in Oxfordshire.

It was eventually restored to steam and can be found at the Yaxham Light Railway in Norfolk.

Now that we know about it we'll obviously have to have our own tiny Kidbrooke rusting quietly in the yard.

The immediately obvious solution seems to be a generic 3D print for these Bagnall locos which is available from Fourdees.

The bigger question is where to place it on the layout?

In the photo above it is sitting on the rails on the long siding which runs in front of the Maenofferen slate sheds and along the wharf beside the Cambrian headshunt.

But that's a very useful section of track for shunting waggons about in our yard, so we hardly want to place what amounts to a buffer stop halfway along it.

So instead I expect we will place it on the ground in the area in front of the smaller shed, with a respectable amount of vegetation growing around its wheels, like in the picture above.

I'm expecting there will be quite a few more oversights brought to our attention when we show the layout in Porthmadog in a few weeks time....