Pick Your Battles

A number of unfortunate motorists in North Wales know from bitter experience over the last two and a half decades that if you pick a fight with a Garratt there's only going to be one winner.

Thus the many level crossings around the Beddgelert area are festooned with bilingual signage warning of the dangers of failing to stop and take a good look at whether there's 62 tonnes of articulated locomotive heading your way.

It's details like that which really lift a scene on a layout and, I hope, sometimes make you look twice to check if it really is a model.

Himself has finished this painstaking task by planting all the poles around Cemetery Crossing which is just to the south of Goat Tunnel.

Careful observation and a lot of detailed photographs on many research visits have paid dividends.

Model Rail Scotland Debuts

Excitement is building ahead of us taking Bron Hebog to Model Rail Scotland in Glasgow in a month's time, which will be our first show in more than two years.

While I was thinking about that the other day it occurred to me that there must be a number of models we built in that time which have not been seen in public yet (aside from on this blog and our social media).

I stopped counting when I got to 15.

So I thought you might like a reminder of what's among the new stuff.

The steam engines include NGG/16 130, which is all new, and in the last two years Himself has got round to painting Lyn and Welsh Pony.

The diesel fleet has been bolstered by the recent arrival of our green Vale of Ffestiniog, and the duplicate of Conway Castle in the livery in which it served with distinction on WHR construction trains and as the Dinas shunter for many years.

Now, we also have the locomotive which replaced it, the big yellow Baguley number 9, and at the other end of the spectrum the former Boston Lodge gofer Harold.

New carriages include 2048 and the fourth of the opulent observation cars Gwyrfai, as well the much less salubrious Ashbury replica 21 and the Pickering brake for the WHHR excursions / incursions. 

If Rule One is enacted at any point over the three days at the SEC you might also be lucky to see some of our new tow-along amusements including a derelict Livingston Thompson on ambulance bogies, and a freshly un-plinthed Princess.

Both are completely out of era - being 1980s representations - and completely out of place on the Welsh Highland section, but you never know...

More prototypical is a deconstructed NGG/16 loaded onto DZ flat wagons for transfer between Boston Lodge and Dinas.

This little tableau is a consequence of us being offered the chance to buy the remains of a Backwoods kit which someone made such a Horlicks of building that the best thing to be done with it was recover any parts which could be used as spares and turn what was left into a conversion piece.

Stop, Look, Listen

The fact that they're too often ignored by road users (and pedestrians)  isn't an excuse for not including the veritable forest of warning signs which surround the modern level crossing.

Himself has been very busy reducing, printing, cutting and sticking for the last week or so to populate the areas around the three crossings on Bron Hebog - including the one subsequently named Bron Hebog after the model provided the inspiration to an operating department puzzling how to differentiate the two crossings on the same lane leading out of Beddgelert.

(That's the one furthest away at the top of the picture.)

Himself assures me that all the signs are faithfully bilingual, too, using photographs of the real things, not a generic product.

I do think this view up the lane - I think it's one of the best on the layout.

The Green Vale

Apart from a few etched brass finishing touches - such as windscreen wipers and nameplates - our second Vale of Ffestiniog is ready for action.

The body has been given a coat of varnish and the glazing fitted.

Tests runs on the upper part of Bron Hebog show this Funkey is able to haul a reasonably prototypical 6 carriage rake up the hill without doing its transmission a mischief.

Given the lead times on custom etched plates I doubt it will be named in time for the Glasgow show at the end of next month but it will certainly be getting a run on the layout.

Home For Retired Rolling Stock

Having powered up the narrow gauge test track at the weekend I soon found I exhausted the entertainment value in running a light engine around a circuit, or pushing wagons with no couplings (yet).

The obvious solution was to raid the collection of rolling stock at Himself's place which is not usually required as part of our exhibition fleet.

A number of years ago I sold off most of the redundant carriage stock (which had been replaced by improved models) to help fund the purchase of the last pair of NGG16 kits from Backwoods Miniatures as the business was wound up. 

However, I was careful to keep hold of models which will allow us to run Dduallt at its nominal date of 1988.

I only need a few items to make up a token train for the 'test track' while I build up my own stock for it.

So in the picture above you can see, from left to right:

* Our first model of bogie brake 10 shown in the all-green livery in which it was first restored to service, from the excellent Dundas kit.

* Carriage 16 in as per 1988 red livery which I scratch built in styrene donkeys years ago.  This has been replaced in the exhibition fleet by a brass Worsley body in Col. Stephens era green and red.

* Carriage 17, from the Langley brass kit. Our very first bowsider  (in fact, our first brass carriage) showing it in 1988 'Mountain Prince' livery, but with all the panelling detail which is not strictly correct.

* Bug Box 3 is from a Chris Veitch brass kit. It's a lovely wee model, but it's always been out of era for our layouts in it's all-over red livery.  (Would look lovely behind the new green Earl of Merioneth though...)

* Jerry M is a Chivers white metal kit running on an unaltered Ibertren chassis.   At the time we built it the idea was it could masquerade as Lilla for those who couldn't tell the difference. Since the arrival of the Robex print for Lilla it has been made redundant.

Also out of shot is our first Dundas model of quarryman's carriage 8, with the wood panelling smoothed over with filler to show it as it was in 1988 with its plywood-faced bodysides.

It's nice to see them getting a run again, anyway.

It Really IS A Test Track

I've had this weekend marked in the diary since Christmas as an opportunity to make some significant progress on the electrics on the 'test track.'

I'm pleased to report that in a full-day session yesterday Himself and I managed to install and wire up all but one of the remaining point motors on the standard gauge side, and were prevented from completing that only by the need for an unforeseen additional switch.

We got that done so efficiently that there was time to get some power into the narrow gauge circuit and sidings.

I've always used inverted commas when referring to the test track, because I fully expect it to morph into more of a home layout project in the fullness of time.

However, I would like to place on record that one of the first things I did when it was wired up was to test propel the well wagon around the circuit, as until now I have not yet been able to do any more than push it by hand along a short section of straight track.

And the test track immediately proved its worth because I discovered the bottom edge of the frames below the axle boxes on one bogie needed a little attention from the file when they fouled on the points.

Bits Of Bob

One of the best things about resin casting is that once you've made the masters (and the moulds) it's delightfully quick to turn out most of the key parts you need to make up a carriage or wagon.

The body shell for 808 was poured and cured in the time it took for me to cook and serve up the kids tea a few evenings ago.

This is the point, however, where progress stalls to the speed of any other scratch build project.

The castings will need their windows cleared of flash and tidied up very neatly before I can think about gluing it together into a box, and then it will need a floor / chassis cut from thick styrene sheet to help keep it all together.

I shan't be rushing ahead too much on this project in case I come up against some detailed differences with the real carriage, with an update expected from the carriage works any day soon.