Make It Stop

It's a contentious opinion, but I'm already fed up of the Platinum Jubilee, and there's still best part of a week to go for us in the media and every part of the service economy to work itself into a frenzy.

It's not a republican sentiment, or any ill-feeling towards the monarch, but more that I instinctively adopt a contrarian attitude when I perceive that I am under some expectation, or obligation, to get excited about an event, or behave a certain way, and when everyone leaps onto the same bandwagon.

I feel exactly the same every four years when the [football] World Cup comes round.  (So, yeah, 2022's a bit of a bummer!)

Right now it feels like you can't move for bunting, the union flag is being plastered onto every conceivable item, and anything that moves - or doesn't - is being painted purple.

Peco has even produced a special edition purple bug box, and it won't surprise you to learn I have absolutely no intention of purchasing one. (And certainly not at £34.95!)

But then again, we don't need to.

As Peco point out, there is a precedent for a purple Small Birmingham, and it dates back to the days of the 'Minffordd Shuttle', when number 4 was returned to service in what was called 'Damson' livery.

At the time it was believed this was a heritage colour scheme after the discovery of fragment of this colour, but it is now known to have been just undercoat.

You can read more about this model in a previous post, but for now its done its job as a vehicle for me to post a rant about the national celebrations.

Toned Down

Princess has returned to the test track from Himself's where it had been sent for the application of a little subtlety.

As it comes out of the box the Kato / Peco England has a number of things which betray that it was produced to a price - or for a certain aspiration of specification -  but these can be easily attended to.

Among the things Himself has done is apply some black paint to the upright at the end of the slidebars, which stands out like a sore thumb in silver.

A brush over with matt varnish makes the smokebox look like a loco that's had a fire in it, and the cab roof looks an awful lot better when it's not black and shiny.

It's also had the happy effect, to my eyes, of making the chimney look a bit fatter and much more prototypical.

The vac pipe bags look a lot more realistic when they are no longer black plastic colour.

The last thing he's done, which you might not notice until I point it out, but is one of those things you can't unsee once you've spotted it, is to run some black paint around the edges of the cab opening,

The livery finish on these models is really very good, but they are badly let down that in places like the cab doorway the black edging is only on the sides and doesn't extend to the edges which remain shiny, maroon-coloured plastic.

It really stood out when you looked at the engine in 3/4 view.

It's such a small thing but it makes such a difference when you fix it,

 

A Bit Of Bob

It's been so long since I did any narrow gauge model making that I can no longer remember what it was, or when it was I was working on it.

However, the castings for FR super saloon 808 (aka BOB) have been gathering dust on the shelf and pricking my conscience for many months now, so I this week I decided I'd better pull my finger out and do something with them.

Part of the reason for the long delay - aside from a general lack of motivation ever since the Glasgow show - is I had run out of the 60 second superglue I've taken to using for assembling resin parts.

It has the benefit of allowing a decent amount of repositioning while not leaving you waiting for ages for the parts to bond, which I've found has always been the case with the so-called 'rapid' epoxy resins.

However, in one of the small DIY shops in town - and we are fortunate to have two here - I came across a 90 second Araldite product which comes in a double syringe dispenser thing.

I was sceptical whether it would actually bond in 90 seconds - it's more like 490 in my experience - but the join does seem to be less brittle than one made with superglue is.

We shall see how it stands up to all the handling as I fit the floor and roof.

 

Adap(ol)tations

There are a few things in the railway modelling scene which defy their age, and some of them are in the old Kitmaster range of injection moulded plastic kits.

Despite its longevity I reckon the footbridge kit is still up there as one of the user-friendly and adaptable you can get.

I first knew it when it was branded as part of the Airfix range, and these days it's under the Dapol banner, and we had one on our large OO gauge layout in the loft.

It was the obvious choice for me to use at the station on the 'test track' because I needed something that wasn't standard sized and could be kit-bashed to link platforms at different heights on the standard and narrow gauge.

As luck would have it I found one in a bargain bucket at the Kyle MRC show in Troon on Saturday where the Greenock club were exhibiting their small Banffshire terminus layout Inverboyndie.

The first change I made was to cut out one of the sections on the upper set of stairs, because if you mount it on a platform the deck of the bridge is so high it would give the passengers vertigo!

The second, more involved, alteration, was to insert an extra segment into the deck to stretch it to the length I needed.

This classic kit has always come with the option of a plain sheet section in the middle, which could be used as an advertising hoarding, but I've never been convinced that it looks very prototypical (although  I'm sure somebody will prove me wrong) so I prefer to have another cross-brace section.

With no spare parts available in the kit I rooted about in my diminishing stock of Evergreen strip and found some stuff that was roughly the same dimensions, and knocked up something that could be used as a master to cast pieces to be inserted between the two halves.

Being slightly impatient, and keen to get the job finished in a day, I made up some RTV rubber with a generous dosage of catalyst which meant the mould was set within a couple of hours and I could quickly cast my two copies with the last dregs of resin I have available.

With that done the first section of the bridge is complete.  Now I need to buy a second kit (probably at full price on the web) to complete the second half stretching across to the NG tracks.

We're Done

Big projects rarely end with a bang, and so it is with model railway layouts.

Himself has declared construction of Bron Hebog is finished with the insertion of a series of brass speed restriction signs in the appropriate places around the layout.

Like Frank Sinatra I suspect that it's not actually over, and in time we'll no doubt find a few scenic improvements to make.

For example, the temporary toilet blocks at the pedestrian entrance to the station are something he keeps mentioning I need to have a go at.

But for now, at least, that's it signed off.

Next stop is the Perth show in around seven weeks time.